Show simple item record

dc.contributor.authorUsó, Vanessa Ghiraldeli
dc.contributor.authorSandnes, Frode Eika
dc.contributor.authorMedola, Fausto Orsi
dc.date.accessioned2019-12-09T12:36:33Z
dc.date.accessioned2020-03-30T09:59:30Z
dc.date.available2019-12-09T12:36:33Z
dc.date.available2020-03-30T09:59:30Z
dc.date.issued2020-06-05
dc.identifier.citationUsó, V.G., Sandnes, F.E. & Medola, F.O. (2020). Using virtual reality and rapid prototyping to co-create together with hospitalized children. In: M. Di Nicolantonio, E. Rossi & T. Alexander (Eds.). Advances in additive manufacturing, modeling systems and 3D prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, 2020 (pp. 279-288) Cham: Springeren
dc.identifier.isbn978-3-030-20215-6
dc.identifier.issn2194-5357
dc.identifier.issn2194-5357
dc.identifier.issn2194-5365
dc.identifier.urihttps://hdl.handle.net/10642/8345
dc.description.abstractThis study reports on a social project involving a collaborative process to co-create toys together with hospitalized children, using Virtual Reality, play practices and 3D Printing technologies. The project had two main phases: the co-creative process with the children and the production of prototypes based on the children’s creative drawings. For the activities involving the children, static virtual reality environments were created to stimulate the children to draw. These drawings were used as reference for the design of 3D toys that then were printed in plastic. A positive effect of the experience on the children’s behaviour was observed during the hospital routine procedures. Despite the technology required and considerably high cost for producing custom pieces with 3D printing, the project was executed successfully. This initiative shows the potential for practical interdisciplinary collaboration approaches between product design and health sciences.en
dc.language.isoenen
dc.publisherSpringeren
dc.relation.ispartofAHFE 2019: Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA
dc.relation.ispartofseriesAdvances in Intelligent Systems and Computing;volume 975
dc.rightsThis is a post-peer-review, pre-copyedit version of a chapter published in Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, that is part of the Advances in Intelligent Systems and Computing book series (AISC, volume 975). The final authenticated version is available online at: https://dx.doi.org/10.1007/978-3-030-20216-3_26en
dc.subjectPlaythingsen
dc.subjectVirtual realityen
dc.subjectHospitalized childrenen
dc.subjectCanceren
dc.subjectRapid prototypingen
dc.titleUsing virtual reality and rapid prototyping to co-create together with hospitalized childrenen
dc.typeChapter
dc.typeChapter
dc.typePeer reviewed
dc.date.updated2019-12-09T12:36:33Z
dc.description.versionacceptedVersionen
dc.identifier.doihttps://dx.doi.org/10.1007/978-3-030-20216-3_26
dc.identifier.cristin1758273
dc.source.isbn978-3-030-20215-6


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record