TKD - Master i Bygg- og konstruksjonsteknikk – sivilingeniør
Recent Submissions
-
Formability of AA5083-H111 aluminum sheets for use in floating photovoltaic structures
(Master thesis, 2023)This investigation focuses on formability aspects of aluminum alloy AA5083-H111 to improve the forming process for floating photovoltaic structures. The study targets the identification of limiting variables and efficiency ... -
Experimental Investigation of Moisture Migration in Tiled Bathroom Walls
(Master thesis, 2023)Moisture related damage to buildings are a continuously increasing trend regarding both occurrences and indemnity cost. More and more knowledge is available in the industry; however, the negative trend continues. This ... -
Mechanical reinforcement of cement pastes with Cellulose Acetate microfibers produced by electrospinning.
(Master thesis, 2023)Electrospun fibers have attracted much attention in various industries due to their distinctive qualities and possible uses, including construction. Electrospinning produces ultrafine fibers by exposing a polymer solution ... -
Structural damage localization and quantification in plane truss structures using optimization techniques
(Master thesis, 2023)Civil infrastructures are susceptible to threats from both nature and human activity; as they are built and used, they deteriorate, potentially resulting in structural damage or even collapse. The detection of structural ... -
Salt-Flavored Green Binder (SAFGB): Focus on Flowability, Microstructure and Strength
(Master thesis, 2023)The construction industry is expanding rapidly as a result of global economic expansion, resulting in increasing demand for and production of building materials. Regrettably, this expansion contributes significantly to CO2 ... -
Finite Element Analysis and field investigation of a deteriorated RC bridge: A case study of Øvre Kvamme bridge
(Master thesis, 2023)A significant number of concrete bridges in Norway are currently approaching the end of their anticipated design life due to deterioration and poor condition. Over the years, these bridges have been subjected to various ... -
Abaqus FEA with Concrete Damaged Plasticity and its feasibility in recreating laboratory experiments: A numerical analysis and sensitivity study
(Master thesis, 2023)Non-linear Finite Element Analysis of concrete is a subject that is constantly worked on. Due to the complex nature of concrete, both in pure states and when reinforced, there are many different models and approaches when ... -
Optimizing SCMs Binder Mix Design for Recycling Sludge in Re-Con Zero Technology
(Master thesis, 2023)Concrete ready mix plant manufacturers face the dual challenges of managing returned concrete and the water required for cleaning the delivery track, as well as the disposal of waste generated during the washing process. ... -
Examining the Dynamic Response of a Floating Bridge Subjected to Simulated Traffic and Waves
(Master thesis, 2023)This study delves into the dynamic interaction between traffic loads, wave loads, and the vertical motion of a floating bridge. By developing an intricate coupled SIMO-RIFLEX model in SIMA and running an intelligent drive ... -
Installation analysis of a long floating pontoon bridge
(Master thesis, 2023)The Norwegian ferry free E39 project aims to cut the current travel time by half from Kristiansand in the south to Trondheim in the north. Crossing the Bjørnafjord, investigated in this thesis, using conventional pier ... -
Tensile resistance of bolts in threaded holes
(Master thesis, 2023)There are many standards governing bolted connections. Bolts in threaded holes are not however fully covered by them. Current Eurocodes determine only minimum thickness of steel plates, but length and width are not governed. ... -
Review and design of structural fiber reinforced concrete elements
(MABY;2022, Master thesis, 2022)This thesis reports main issues, and findings in designing FRC structural elements and presents a new approach for predicting the real residual flexural behavior of FRC elements validated using non-linear finite-element ... -
Life cycle assesment of floating offshore wind farms
(MABY;2022, Master thesis, 2022)Socio-economic conditions and environmental concerns induced the need of renewable energy. Α continued growth of wind energy sector and specifically for offshore wind turbines is observed globally. For reasons of wind ... -
Effect of high dosage of steel fibers on mechanical properties of UHPFRC: Application of response surface method
(MABY;2022, Master thesis, 2022)The master thesis herein described mainly focused on developing a statistical model using Response Surface Methodology (RSM) to predict the performance of ultra-high performance fiber reinforced concrete (UHPFRC). Furthermore, ... -
Automatic BIM-model creation of bridge structure using 3D-laser scanning, algorithms and parametric modeling
(MABY;2022, Master thesis, 2022)Bridges have a crucial and huge role in the safety of the public. An important aspect in maintaining the safety of a bridge structure is to have access to a BIM-model that can be used in analysis and facility management. ... -
Parametric study of façade elements subjected to blast loads
(MABY;2022, Master thesis, 2022)This study has investigated the effects of scaled distance, façade thickness, Young’s modulus and density on the reaction forces of a façade element subjected to blast load, and to what extent an empirical equation can ... -
Mechanical behaviour and the modelling of PVC foam
(MABY;2022, Master thesis, 2022)Foam materials are widely applied in many industrial fields due to their superior characteristics regarding high strength to weight ratio. Additionally, they may offer high toleration to damage and exceptional energy ... -
Numerical analysis of the Vattedal bridge strengthened with UHPC overlays
(MABY;2022, Master thesis, 2022)This master thesis addresses how ultra-high performance concrete strengthening can affect the structural response of a single-span concrete bridge in Vattedal, Tysnes. Several FE-models with different UHPC configurations ... -
Local buckling of welded I-sections in high strength steel subjected to axial compression
(MABY;2022, Master thesis, 2022)As a result of the continuous development in steel production there are at the time several grades of high strength steels (HSS). Due to this increase in strength, structures are potentially designed slenderer than before. ... -
Seismic analysis of an RC building with newly constructed additional stories, Kristina kvartalet, Tønsberg.
(MABY;2022, Master thesis, 2022)This master thesis will be based on a real-world project where the author’s employer – Projekt Planung AS were responsible for the structural engineering. The building is the Kristinakvartalet / Kristina Quarter in Tønsberg, ...
RSS 2.0