Browsing TKD - Institutt for bygg- og energiteknikk by Document Types "Journal article"
Now showing items 101-120 of 314
-
Effect of span length on behavior of MRF accompanied with CBF and MBF systems
(Journal article; Peer reviewed; Journal article, 2017)The main objective of this study is to quantify effects of variations of aspect ratio (ratio of span length to story height) and lateral resisting system on response of high-rise steel structures. In the present research ... -
Effect of stiffeners on behavior of steel plate shear wall with rectangular openings
(AIP Conference Proceedings;Volume 2293, Issue 1, Journal article; Peer reviewed, 2020-11-25)Steel Plate Shear Walls (SPSWs) with and without stiffeners, due to excellent seismic performance, are considered as a lateral load resisting system. Stiffeners have widely been used in SPSW to improve the buckling behavior ... -
Effect of temperature on CO2 curing, compressive strength and microstructure of cement paste
(Cement and Concrete Research;Volume 157, July 2022, 106827, Peer reviewed; Journal article, 2022-05-05)This study investigated the effect of temperature (5 ◦C–50 ◦C) on the carbonation process, compressive strength and microstructure of CO2-cured cement paste. Results showed that the carbonation process and rate were ... -
Effect of time dependent corrosion rate on residual capacity of corroded RC beam
(IOP Conference Series: Materials Science and Engineering;Volume 652, Number 1, Journal article; Peer reviewed, 2019)Corrosion is the most commonly severe defect in reinforced concrete (RC) structures and it mainly causes reduced rebar cross-section. The corrosion rate is the determining parameter of the progress of corrosion-induced ... -
Effect of ventilation on perceived air quality in 18 classrooms
(IOP Conference Series: Materials Science and Engineering;Volume 609, Journal article; Peer reviewed, 2019)The aim of this paper is to assess whether reducing the minimum ventilation airflow rate (Vmin) has any negative impacts on perceived air quality (PAQ) upon entering an unoccupied room. Seventeen healthy young adults were ... -
Effect of wave-current interaction on a long fjord-crossing floating pontoon bridge
(Engineering structures;Volume 266, 1 September 2022, 114549, Peer reviewed; Journal article, 2022-06-20)Fjord-crossing floating bridges are sophisticated structures subjected to complex environmental loadings including combined action of wave and current. However, the effect of wave-current action is often neglected in a ... -
Effect ofaAging of bearings on the behavior of single-Span railway bridges
(Peer reviewed; Journal article, 2022) -
The effects of fan and door opening on a cold storage room: a numerical study
(Linköping Electronic Conference Proceedings;Issue: 153, Conference: Proceedings of The 59th Conference on Simulation and Modelling (SIMS 59), Journal article; Journal article; Peer reviewed, 2018-11-19)We present numerical analysis of a cold storage room with a product load, a fan, and a sliding door by solving compressible form of the conservative 3D Navier Stokes equation (without Boussinesq approximation) together ... -
Effects of spatial variability and correlation in stochastic discontinuum analysis of unreinforced masonry walls
(Construction and Building Materials;Volume 337, 27 June 2022, 127511, Peer reviewed; Journal article, 2022-04-27)This study investigates the influence of the uncertainty in material properties on the in-plane lateral behavior and capacity of stone masonry walls via a stochastic discontinuum analysis framework. The framework is ... -
Efficacy of Vehicle Scanning Methods in Estimating the Mode Shapes of Bridges Seated on Elastic Supports
(Peer reviewed; Journal article, 2023)This study systematically assesses the efficacy of the vehicle scanning methods (VSM) in accurately estimating the mode shapes of bridges seated on elastic supports. Three state-ofthe-art VSM methods are employed to obtain ... -
Enhancing learning outcomes by introducing BIM in civil engineering studies – experiences from a university college in Norway
(International Journal of Sustainable Development and Planning;Volume 13, Issue 1, Journal article; Peer reviewed, 2018)It is a challenge to introduce building information modeling (BIM), as demanded from the industry, in an already packed curriculum for higher engineering education. There is therefore a need for alternative ways to include ... -
Ensemble machine learning based driving range estimation for real‐world electric city buses by considering battery degradation levels
(IET Intelligent Transport Systems;Volume 15, Issue 6, Peer reviewed; Journal article, 2021-04-20)Battery electric buses (BEBs) have been regarded as effective options to address the congestion and pollution problems in the field of urban transportation. However, since the limited driving range of BEBs brings challenges ... -
Evaluation of cost-effective measures for the renovation of existing dwellings in the framework of the energy certification system: A case study in Norway
(Journal article; Peer reviewed, 2022)The Energy Performance Certificate (EPC) for existing dwellings has not been able to promote the renovation rate. The main reasons are associated with the low quality of the assessment and renovation recommendations provided. ... -
Evaluation of local traffic safety plans
(WIT Transactions on the Built Environment;Volume 186, Journal article; Peer reviewed, 2019)Plan evaluation has recently received considerable attention from planning scholars, while plan evaluation methods are not commonly used in practice. Evaluation tells decision-makers whether and how effectively their ... -
Examining the regulating impact of thermal mass on overheating, and the role of night ventilation, within different climates and future scenarios across China
(Cleaner Engineering and Technology;, Peer reviewed; Journal article, 2022)An ever-increasing challenge of global warming and climate change is the issue of overheating in buildings. Several studies have developed numerous passive strategies to lessen the effects of overheating and reduce cooling ... -
Expectations to implementation of big data – Use of IDDS to explore multiple views of implementation
(;2016, Journal article; Peer reviewed, 2016)Implementation of Big Data in organisations is often connected to high expectations and investment in advanced technology and methods for analysis. This case study explores expectations for and perspectives on the ... -
Experimental and numerical analysis of indoor air quality affected by outdoor air particulate levels (PM<inf>1.0</inf>, PM<inf>2.5</inf> and PM<inf>10</inf>), room infiltration rate, and occupants' behaviour
(Science of the Total Environment;Volume 851, Part 2, 10 December 2022, 158026, Peer reviewed; Journal article, 2022-09-01)This study conducted an experimental analysis of how indoor air quality (IAQ) is influenced by the outdoor air pollutants levels, infiltration rate, and occupants' behaviours. The impacts of these factors on IAQ were ... -
Experimental and numerical studies on thermal performance of an office cubicle having gypsum boards coated with PCM-enhanced spackling
(SINTEF Proceedings;No 5, Journal article; Peer reviewed, 2020)PCM enhanced wallboards on internal surfaces of building spaces is an attractive solution for improvement of thermal performance in buildings. This work deals with using a novel spackling compound as a primer coating ... -
Experimental and Numerical Study of an Active Solar Heating System with Soil Heat Storage for Greenhouses in Cold Climate Zones
(Buildings;, Peer reviewed; Journal article, 2022)Root temperature is an important ecological factor affecting plant growth. A solar greenhouse with an active solar heating system was built in Jinan, in the cold climate zone of northern China. Experiments encompassing the ... -
Experimental investigation into the failure process of exterior beam-column joints with high-strength reinforcements
(IOP Conference Series: Materials Science and Engineering;Volume 910, Journal article; Peer reviewed, 2020)Although using high-strength reinforcements (HSRs) have economical and execution benefits, their possible negative effects on the performance of structures such as ductility, energy dissipation, and damage process caused ...