Blar i TKD - Master i Bygg- og konstruksjonsteknikk – sivilingeniør på tittel
Viser treff 8-27 av 58
-
Ballistic impact on concrete plates with compressive strengths of C35, C75 and C110
(MABY;2020, Master thesis, 2020)The main objective of this thesis has been to assess the behavior of concrete plates subjected to ballistic impact from ogival steel projectiles. The experiments were run at the Structural Impact Laboratory (SIMLab) at ... -
BIM implementation and adoption in the architecture, engineering and construction industry
(MABY;2022, Master thesis, 2022)BIM is emerging as the industry standard approach to the modelling and management of building lifecycles from design phase until maintenance and demolishing (Lam et al., 2017). Despite the fact that BIM aims to work as an ... -
Comparison of concrete shear wall and mega-braced steel frame regarding seismic performance
(MABY;2020, Master thesis, 2020)The seismic behavior of two different lateral force resisting systems are compared regarding base shear, roof displacement and drift ratio through nonlinear static and dynamic analyses in the software SAP2000. The case ... -
Condensation and mould growth risk in nature-based insulating materials integrated in a timber-based wall system.
(MABY;2022, Master thesis, 2022)This study is written as a part of the Build-in-Wood project, in cooperation with the Norwegian Institute of Wood Technology. The goal was to evaluate the condensation and mould growth risk in flax fibre, wood fibreboard ... -
Control of the curing process for hybrid concrete in post-tensioned slabs
(MABY;2022, Master thesis, 2022)Through the computer-based curing technology program CrackTeSt COIN, the thesis has made measurements of two concrete compositions with high pozzolan dosage, respectively 50% and 65% of the total effective binder. The task ... -
Development of FEM methodology for analyzing wind-induced loads on transmission lines for sub-arctic terrain and extreme atmospheric conditions
(MABY;2022, Master thesis, 2022)This thesis presents structural analysis of power lines with the use of the Finite Element Method (FEM). The methodology of analyzing the atmospheric loading on conductors and supporting structures is being developed. The ... -
Double-layer configurations of high-strength steel plates subjected to ballistic impact: A numerical study
(Master thesis, 2021)This thesis investigates projectile impact on double-layered high-strength steel (HSS) plates commonly used for ballistic protection of buildings. The gap between adjoining protective plates in such configurations may be ... -
Dynamic analyses of railway bridges with elastic bearings
(MABY;2022, Master thesis, 2022)With an increasing trend in the development of new railway lines together with a greater focus on optimizing the life expectancy of infrastructure such as railway bridges, the importance of effectively monitoring and ... -
Earthquake response analyses of bi-linear pile supported superstructures
(MABY;2020, Master thesis, 2020)The use of piles is a widespread support system for superstructures located on unstable surfaces, which have strict behavioural requirements. The requirements from Eurocode 8 for pile supports is that they have to be ... -
Effect of high dosage of steel fibers on mechanical properties of UHPFRC: Application of response surface method
(MABY;2022, Master thesis, 2022)The master thesis herein described mainly focused on developing a statistical model using Response Surface Methodology (RSM) to predict the performance of ultra-high performance fiber reinforced concrete (UHPFRC). Furthermore, ... -
The efficiency of NDT methods in existing concrete structures
(Master thesis, 2021)In this thesis, different NDT methods have been investigated for reinforced and post-tensioned concrete structures. The durability of these structures is mainly affected by concrete composition and deterioration. For that ... -
Evaluation of crack width formulas for reinforced concrete slabs
(MABY;2020, Master thesis, 2020)Proper design of concrete structures is today important to achieve cost-effective and sustainable constructions. One of the limits which needs to be meet during design is the allowable crack width diameter. This thesis ... -
Examining the Dynamic Response of a Floating Bridge Subjected to Simulated Traffic and Waves
(Master thesis, 2023)This study delves into the dynamic interaction between traffic loads, wave loads, and the vertical motion of a floating bridge. By developing an intricate coupled SIMO-RIFLEX model in SIMA and running an intelligent drive ... -
Experimental investigation of moisture levels and drying time in bathrooms
(MABY;2022, Master thesis, 2022)Achieving comfortable indoor relative humidity and air temperature are desirable for any given user. As extreme levels of relative humidity can cause significant damages in buildings. Therefore, it of the utmost importance ... -
Experimental Investigation of Moisture Migration in Tiled Bathroom Walls
(Master thesis, 2023)Moisture related damage to buildings are a continuously increasing trend regarding both occurrences and indemnity cost. More and more knowledge is available in the industry; however, the negative trend continues. This ... -
Finite Element Analysis and field investigation of a deteriorated RC bridge: A case study of Øvre Kvamme bridge
(Master thesis, 2023)A significant number of concrete bridges in Norway are currently approaching the end of their anticipated design life due to deterioration and poor condition. Over the years, these bridges have been subjected to various ... -
Finite element model updating of a stone masonry tower using 3D laser scanner and accelerometers
(MABY;2020, Master thesis, 2020)This study’s main objective was to investigate the dynamic response of the ancient masonry stone tower Slottsfjelltårnet located in the oldest city of Norway, Tønsberg. The study takes in use several fields in the process ... -
Finite element model updating of the Stange railway overpass using operational modal analysis
(MABY;2022, Master thesis, 2022)The growing demand for public transportation and the need for trains at higher speeds highlights the importance of assessment and rehabilitation of train bridges. A challenge of rehabilitation is to restore or improve the ... -
Formability analysis of AA6016-T4 aluminium alloy sheets subjected to roping
(MABY;2020, Master thesis, 2020)Due to its good formability characteristics, AA6xxx aluminium alloys have become popular as a light-weight alternative to steel for components produced by stamping operations for use in the bodywork of cars. In this thesis, ... -
Formability of AA5083-H111 aluminum sheets for use in floating photovoltaic structures
(Master thesis, 2023)This investigation focuses on formability aspects of aluminum alloy AA5083-H111 to improve the forming process for floating photovoltaic structures. The study targets the identification of limiting variables and efficiency ...