Effect of leading-edge erosion on the performance of offshore horizontal axis wind turbine using BEM method
Peer reviewed, Journal article
Published version
Permanent lenke
https://hdl.handle.net/11250/3102293Utgivelsesdato
2023Metadata
Vis full innførselSamlinger
Originalversjon
Journal of Physics: Conference Series (JPCS). 2023, 2626 (012028), . 10.1088/1742-6596/2626/1/012028Sammendrag
This research focuses on the effect of leading-edge erosion on the performance
of wind turbines, specifically the GE1.5XLE horizontal axis wind turbine. The blade element
momentum (BEM) method is used to predict the performance of the eroded blade configurations,
and the open-source code QBLADE is used for simulation. The importance of including the
effects of blade erosion in the design phase is highlighted, as it can optimize turbine performance
and ensure operational efficiency. The high blade tip velocity in large rotors, which can reach
90-110 m/s, makes them susceptible to sand and rain erosion, which can significantly affect
the turbine’s performance. The research compares the performance of clean and eroded blade
configurations, with different levels of leading-edge erosion as percentages of the chord (0.5%,
1.0%, 1.5%, and 2.0%). The results show that the worst-case scenario of 2.0% leading-edge
erosion reduced the lift-to-drag ratio of an airfoil by 65% and reduced the power output by
20%. The low-fidelity analysis methodology presented in this research is fast and can be easily
implemented in the early design phase of wind turbines to predict the effect of leading-edge
blade erosion. This allows for cost-effective and efficient design solutions that take into account
the effects of erosion on wind turbine performance. The research provides valuable insights for
the wind energy industry to improve the reliability and performance of wind turbines.