TKD - Master i Bygg- og konstruksjonsteknikk – sivilingeniør: Nye registreringer
Viser treff 21-40 av 57
-
Dynamic analyses of railway bridges with elastic bearings
(MABY;2022, Master thesis, 2022)With an increasing trend in the development of new railway lines together with a greater focus on optimizing the life expectancy of infrastructure such as railway bridges, the importance of effectively monitoring and ... -
Modelling of crack initiation in fibre-reinforced injection moulded parts
(MABY;2022, Master thesis, 2022)This study addresses the effects of injection moulding weld lines and fibre orientation distributions on the mechanical properties of short fibre-reinforced thermoplastics (SFT). In this thesis, a literature review, as ... -
Development of FEM methodology for analyzing wind-induced loads on transmission lines for sub-arctic terrain and extreme atmospheric conditions
(MABY;2022, Master thesis, 2022)This thesis presents structural analysis of power lines with the use of the Finite Element Method (FEM). The methodology of analyzing the atmospheric loading on conductors and supporting structures is being developed. The ... -
The influence of straight steel fibers on the fresh and mechanical properties of Ultra-high-performance concrete (UHPC)
(MABY;2022, Master thesis, 2022)This study investigated the effect of steel fiber and UHPC constituents on the fresh and mechanical properties. With the help of a systematic review and experimental program, the study shows that an increase in fiber content ... -
Virtual design and construction (VDC) in project management
(MABY;2022, Master thesis, 2022)Architectural, Engineering, and Construction practitioners are motivated to adopt new methods, such as Virtual Design and Construction (VDC) models. Kunz and Fischer define virtual design and construction (VDC) as follows: ... -
Finite element model updating of the Stange railway overpass using operational modal analysis
(MABY;2022, Master thesis, 2022)The growing demand for public transportation and the need for trains at higher speeds highlights the importance of assessment and rehabilitation of train bridges. A challenge of rehabilitation is to restore or improve the ... -
Reducing global warming impact for Kjøkøysund based on alternative bridge designs
(MABY;2022, Master thesis, 2022)Concrete manufacturing account for almost one tenth of the global CO2- emissions. A big portion of the concrete greenhouse gas emission comes from the production of cement, still concrete is the most used construction ... -
BIM implementation and adoption in the architecture, engineering and construction industry
(MABY;2022, Master thesis, 2022)BIM is emerging as the industry standard approach to the modelling and management of building lifecycles from design phase until maintenance and demolishing (Lam et al., 2017). Despite the fact that BIM aims to work as an ... -
Control of the curing process for hybrid concrete in post-tensioned slabs
(MABY;2022, Master thesis, 2022)Through the computer-based curing technology program CrackTeSt COIN, the thesis has made measurements of two concrete compositions with high pozzolan dosage, respectively 50% and 65% of the total effective binder. The task ... -
Experimental investigation of moisture levels and drying time in bathrooms
(MABY;2022, Master thesis, 2022)Achieving comfortable indoor relative humidity and air temperature are desirable for any given user. As extreme levels of relative humidity can cause significant damages in buildings. Therefore, it of the utmost importance ... -
Condensation and mould growth risk in nature-based insulating materials integrated in a timber-based wall system.
(MABY;2022, Master thesis, 2022)This study is written as a part of the Build-in-Wood project, in cooperation with the Norwegian Institute of Wood Technology. The goal was to evaluate the condensation and mould growth risk in flax fibre, wood fibreboard ... -
Double-layer configurations of high-strength steel plates subjected to ballistic impact: A numerical study
(Master thesis, 2021)This thesis investigates projectile impact on double-layered high-strength steel (HSS) plates commonly used for ballistic protection of buildings. The gap between adjoining protective plates in such configurations may be ... -
System identification and finite element model updating of the stange railway overpass
(MABY;2021, Master thesis, 2021)This study presents the implementation of a sensitivity-based finite element model updating process on a 48.6 m long, continuous, concrete railway bridge located in Stange, Norway. Lack of documentation and uncertainties ... -
Investigate the environmental impacts of adaptive reuse industrial heritage building and compare with other scenarios: Demolition and New construction
(MABY;2021, Master thesis, 2021)Nowadays, the environmental impact assessment is improved for new construction buildings. The European Commission targeted to achieve the 55% of carbon reduction in 2030 and 60% in 2050 compared to the 1990 carbon emission ... -
Target Value Design – A comparison of Norwegian public construction projects
(MABY;2021, Master thesis, 2021) -
Impact of urban morphology on pressure coefficient on building facades and wind velocity in street canyons: The case of Oslo
(MABY;2021, Master thesis, 2021)By 2050 the number of people living in urban areas will be increased by 2.5 billion. To deal with such an inflow of people, cities will have to build taller, bigger, and denser. This will lead to a severe change in the ... -
AUTOMATED REVERSE Modeling and examination of as-built steel truss based on point cloud data: Machine learning and bim
(MABY;2021, Master thesis, 2021)Building Information Modeling (BIM) has improved the way structures are designed and constructed over the last decades. Although BIM implementation is an expected part of newer construction projects, the technology is ... -
Indoor environment in modern Norwegian buildings in connection with moisture-related parameters
(MABY;2021, Master thesis, 2021)The data collected for this thesis was real data measured in residential apartments. The focus and objective of this project was called healthy, energy-efficient urban home ventilation (NFR 2020-2024); where this thesis ... -
Aeroelastic damping of high-rise timber buildings
(MABY;2021, Master thesis, 2021)This thesis aims to connect three different interdisciplinary engineering fields, in order to provide a holistic approach to structural design. Real time fluid-structure interaction (FSI), requires a two-way coupling ... -
A new framework for long-term vibration-based SHM
(MABY;2021, Master thesis, 2021)This thesis presents a methodology for vibration-based damage identification in a long-term structural health monitoring scheme. The frequency with which damage is detected is proposed as a new parameter. In order to ...